High Capacity Submersible Slurry Pump

High capacity submersible slurry pump: Tired of ordinary mud pumps that clog after a few uses or only skim the surface? If you're stuck with "no suction, constant blockages, and slow work," this pump is the solution you need.

I. Why is it called a sand-eating expert?

Unlike ordinary pumps, the high capacity submersible sludge pump is specifically designed to tackle "hard nuts to crack." All its flow-through components are made of high-chromium wear-resistant alloy material. This material has extremely high hardness and can easily withstand the scouring of sharp particles such as sand, slag, and slurry, greatly extending its service life.

In addition to the main impeller, it also has an additional agitator impeller at the bottom. When the pump starts, the agitator impeller directly stirs up the sludge settled at the bottom of the pool, forming a high-concentration slurry, which is then sucked away by the main impeller. This means you no longer need to send people to the bottom of the pool for sludge removal; wherever the pump goes, the area becomes clean.

II. Core Performance Parameters

III. core strengths

Compact Structure, Space-Saving

1. The Submersible slurry pump and motor are coaxially integrated, allowing direct underwater operation. You don't need a dedicated pump house or long suction pipes, saving both money and effort.

Triple Sealing Protection

2. We employ unique mechanical seal technology, combined with oil chamber sealing and overload protection, effectively preventing water from entering the motor and ensuring stable operation even under high pressure.

Extremely Simple Maintenance

3.No complex auxiliary equipment is required; simply plug it in and use. Regular checks of easily worn parts are all that's needed, resulting in extremely low maintenance costs.

IV. Customer Case Sharing

We once served a friend who runs a mineral processing plant. His previous slurry tank was 8 meters deep, and traditional vertical slurry pumps, due to shaft length limitations, could never reach the bottom slag. After switching to our ZJQ150-25-22 submersible slurry pump, which is lowered directly to the bottom of the tank using slings, not only was the sludge removal thorough, but the high efficiency also reduced the original three-day project time to less than two days.

V. Consultation and Model Selection

Because the concentration and depth of sediment vary from project to project, choosing the right model is more important. If you also need this high capacity submersible mud pumpfor your tasks, please feel free to contact me. My technical team will calculate the relevant parameters and provide solutions free of charge.

Please contact

Name：Lillian Zheng

Email：Lillian@deponpump.com

Whatsapp/Wechat：86 15530238138