High Flow Mixed Flow Pump

The high flow mixed flow pump is suitable for large-flow transportation, such as areas where floods occur. These pumps are divided into horizontal mixed flow pumps and submersible mixed flow pumps. They can not only be used with diesel engines to achieve more flexible transportation on shore, but can also be installed directly underwater. This article mainly introduces horizontal mixed flow pumps. The head of mixed flow pumps is generally not very high, but its large flow characteristics are very suitable for agricultural transportation, urban drainage and water diversion projects.

Next, we will introduce the high flow mixed flow pump according to the needs of a Kenyan customer.
This customer wanted two water pumps for flood discharge. His needs were very simple: easy to move, large flow, and low head.

This customer provided the parameters of flow and head, with the head being 1440m³/h and the head being 6m. Considering the customer's need for easy mobility, we selected the appropriate model for the customer and added a two-wheeled movable trailer.

According to customer needs, we chose the model 400HW-10. The meaning of the pump model is: 400HW-10
400 - Indicates that the pump inlet diameter is 400 mm (4 inches)
HW - High flow mixed flow pump
10 - The representative design head is 10 meters.

After reviewing the parameters, the customer confirmed the solution and gave a positive review after receiving the pump truck.
This actual customer case is equipped with a diesel engine drive. This pump can also be used with a motor. If your actual situation is more suitable for a motor, we can also equip the motor according to your needs.
When selecting a mixed flow pump, the following information is required:
1. Flow rate
2. Head
3. Medium type
4. Introduction to local working conditions