Split Casing Water Pump in Water Plant

Split casing water in water plant is driven by electric motor and diesel engine.

Here is main performance parameters of split casing water pump in water plant as follows:

Pump outlet diameter Dn: 800-1000mm

Capacity Q: 22-16236 m3/h

Head H: 7-300m

Temperature T: -20℃-200℃

Solid parameter ≤80mg/L

Permissible ≤5MPa

There are some advantages of split casing water pump in water plant as follows:

Stable structure: Due to short spacing between both side supports, split casing water pump in water plant work stably with less noise vibration.

Simple and beautiful appearance, the inlet and outlet of split casing water pump in water plant are at the same line which makes pump look beautiful and simple.

Easy maintenance: Due to the open center structure of split casing water pump in water plant, it is repaired easily. Besides it is no necessary to adjust mechanical seals. Therefore it cost few money to repair it.

Split casing water pump in water plant can be vertically and horizontally mounted according to different working condition with mechanical seals and packing seals.

High capacity: Split casing water pump in water plant belongs double suction water pump. So its capacity is higher than end suction water pump.

If you have any interest, please do not hesitate to contact me.