IS End Suction Water Pump With Pump Start
Pump Start:
1. Before linking both pump and motor, make sure the motor moves in the correct direction and the pump moves flexibly.
2. Close the gate valve on the vomit pipeline.
3. Prime water into the pump fully or use a vacuum pump to lead water.
4. Turn on the power. When the pump reaches the normal moving speed, gradually open the gate valve on the vomit pipeline and adjust it to the desired working conditions. The pump is not allowed to continually work over 3 minutes with the gete valve closed.
Contact us:
Shirley S.
Phone/WA: +86 13932278621
Email: admin@deponpump.com
Website: www.deponpump.com
