The oil transfer pumps conveys some relatively corrosive and abrasive media. The oil pump is corrosion-resistant, wear-resistant and well sealed. During the production process, petroleum companies will produce many highly corrosive media, such as acids, salts, alkaline solutions, etc. Oil...
The oil transfer pumps conveys some relatively corrosive and abrasive media. The oil pump is corrosion-resistant, wear-resistant and well sealed.
During the production process, petroleum companies will produce many highly corrosive media, such as acids, salts, alkaline solutions, etc. Oil transfer pumps are made of stainless steel, fluoroplastics and other corrosion-resistant materials, so that the pump will not be damaged during the transportation of corrosive materials.
If the transported medium contains solid particles, such as slurry, then the flow-through components of the chemical pump will be easily worn. Therefore, we will also choose some materials such as high-chromium cast iron and alloys to improve the abrasion resistance of the pump.
Therefore, we can find that when selecting oil transfer pumps, not only specific parameters such as flow rate and head are required, but we also need to provide more specific information about the medium to help the pump enterprise select the appropriate model. The following parameters need to be provided when selecting materials: what the medium is, temperature, viscosity, pH value, density, etc.
Of course, if you can't provide these parameters of the medium, don't worry, because the oil transfer pumps enterprise will help you make the selection based on the parameters you have.
A customer from Kazakhstan wanted oil transfer pumps that could transport condensate oil. In addition to the necessary flow rate and head, his parameters also included the density and viscosity of the medium. The specific parameters are as follows:
Flow rate: 200m³/h
Lift: 210m
380v 50hz 3000rpm
Medium: condensate oil
Density: 750kg/m³
Viscosity: 0.8841mm²/s
Explosion-proof mark: IEXDllBT4
According to the customer's needs, we selected a ZE100-450 oil transfer pump for him. This pump not only meets the customer's flow and head requirements, but also uses S-5 as the flow component, PL11 as the flushing solution, and a motor power that meets the explosion-proof level, with a power of 200kw.
The inlet and outlet diameters of this pump are 150mm and 100mm respectively.
Oil transfer pumps not only has excellent performance, but also is popular with customers because of its reasonable price.
Lillian
Email: lillian@deponpump.com
Whatsapp: +86 159 3189 8136
Hot Tags: oil transfer pumps, made in China, China, manufacturers, factory, quotation, price list
