SP Series Slurry Pump

SP series slurry pump

SP series slurry pump is a vertical centrifugal slurry pump, immersed in the liquid, used to transport abrasive, coarse particles, high concentration of slurry. It does not need any shaft seal and shaft seal water, and can work normally under the condition of insufficient suction volume.

Introduction 

SP type pump overcurrent component is made of wear-resistant metal.

SPR type pump immersed liquid parts with rubber lining, suitable for conveying no edges and corners of abrasive slurry.According to the level of slurry pool, different lengths of pump shaft or suction pipe can be selected.The use of a variety of speed and a variety of variations, so that the pump under the best conditions of operation, long service life, high operating efficiency, can meet the harsh conditions of many kinds of transport.

Application

It is mainly suitable for conveying corrosive, coarse particles and high concentration slag slurry. Widely used in metallurgy, mining, coal, electricity, building materials, environmental protection and other departments.

Structural features

1. Adopt vertical cantilever type, single pump shell structure.

2. Double suction, half open impeller design, using hard alloy or rubber impeller.

3. Cartridge bearing assembly, high capacity bearing design, bearing grease lubrication.

4. The clearance between the impeller and the guard plate can be adjusted to ensure efficient operation of the pump.

5. No shaft seal is required.

6. Pump and drive machine can choose direct drive, triangle belt drive.

7.RVS type adopts rubber flow parts and rubber lining parts in contact with the slurry, which can adapt to strong corrosive conditions.

If you are interested in our pumps,please contact me.