Hot Water Multistage Centrifugal Water Pump

The serial pump is multi-stage sectional centrifugal pump with the excellent hydraulic model, it has advantages of high-efficiency, energy-saving, wide performance range, operating safely and steadily, low noise, long life and convenience for installing and repairing etc. It can deliver heat water, oil, corrosive or wearable medium by changing material of pump.

Type D pump is used in mine and urban project for delivering clear water without solid particles or other liquids which are physically or chemically similar to clear water. The temperature of liquids are not be over 80℃.

Type DM pump is used to deliver neutral water with solid particles below 1.5% (viscosity less than 0.5mm) and other sewage. It is suitable for using in steel factory and mine etc. The temperature of liquids can not exceed 80℃.

Type DF pump is used for delivering corrosive liquids without solid particles, the temperature of liquids is -20℃～105℃.

Type DG type pump can transport temperature is 20 ℃ ~ 160 ℃, - not containing solid particles, no corrosive liquid..

The inlet pressure of all above pumps is less than 0.6Mpa

Nomenclature

D(DM,DF,DG)85-67×3

D - Multi-stage horizontal centrifugal pump    

DM - Multi-stage wearable centrifugal pump

DF -Multi-stage anti-corrosive centrifugal pump

DG -The boiler feed water pump

85 -  The capacity is 85m3/h at design point

67 -  The single stage head is 67m at design point

3 - The stage number is 3 stage

100D16×3

100 - Inlet diameter of pump is 100mm

D - Multi-stage horizontal centrifugal pump

16 -  The single stage head is 16m at design point

3 - The stage number is 3 stage

Range of performance (Design point)

Capacity：6.3～600m3/h

Head：22.8～650m