The introduction of ISO series water pump
ISO series water pump is used for conveying clean water and other liquid similar to physical and chemical properties of water and suitable for industrial and urban water supply, irrigation and garden sprinkler, fire fighting and so on. The flow rate and head of ISO water pump are more higher than IS series water pump. Besides, the rotate speed is more higher. The quality of ISO Water Pump is high and it is no problem to test many times. It is driven by diesel engine and electrical motor. The pump material is cast iron and stainless. Here is our data about water pump as follows:
Overview of the pump
Maximum flow: 1450m³/h
Maximum head: 222m
Shaft seal: packing and mechanical seal
Features of pump:
Good quality
Compact structure. ISO series pump has an internal structure. Beautiful appearance, low noise, high head and high flow rate.
Different seals
Here are two kinds of seal: packing seal and mechanical seal. You can choose one according to your medium. We can satisfy your different requirements.
Different driven methods
There are two different driven methods: electric and diesel driven. If you are inconvenient, such as your pump need work outside, you can select the diesel engine. Besides, we can provide rain cover with you to protect the pump.
Different impeller materials
Casting iron impeller is the most common. Its advantage is cheap. If your medium is normal clean water, it is the best choice to choose it. The other is casting steel. It can meet you if your medium is different from clean water.
If you have any interest about pump, please feel free to contact us.
Tel: +86 15230016546
Email: maggie@depumps.com
